KSQ Technologies (Beijing) Co. Ltd
KSQ Technologies (Beijing) Co., Ltd.
Add to Cart
Boart Longyear Standard HQ Series Codre Drilling Tools Diamond Impregnated Core Drill Bits
Impregnated Diamond Core Bit
Impregnated Diamond Core Bit is made from high-quality synthetic diamond and metal powder which could be used in various types of strata. The best effect is achieved through the flexible design according to the different strata and parameters of drilling equipment.
Surface Set Diamond Core Bit
Surface Set Diamond Bit is produced from a single layer of natural diamond setting on the surface of bit crown with hard matrix, and primarily recommended for drilling relatively soft, abrasive, unconsolidated formations that are not effectively drilled by impregnated diamond bit. It is also recommended for drilling harder formations, which the available rotary speeds and bit loads are insufficient to use impregnated diamond bits due to drilling equipment limitations.
In most cases, Surface Set Diamond Bits will provide higher rates of penetration than in softer formations due to the greater degree of exposure of the individual diamond crystals.
Tungsten Carbide Core Bit
Tungsten Carbide Core Bits are designed especially for soil investigation and geotechnical drilling, but also suitable in some applications for mineral exploration. As the tungsten Carbide is softer than diamond stones, the formations are limited in the range of soft or some medium rocks, like the overburden drilling, cleaning of drill holes, e.g. for the removal of steel fragments in hole.
PDC Core Bit
PDC Core Bit has a long working Life, very fast penetration and high percentage core recovery in soft to hard rock formations. PDC bit mostly be used for drilling with air, mud or foam flushing.
| Sizes Available | |||
| Wireline series | Geobor S, WLA, WLB, WLN, WLH, WLP, WLB3, WLN3, WLH3, WLP3, WLN2, AQ, BQ, NQ, HQ, PQ, SQ, PQ3, HQ3, NQ3, BQ3, NQ2, WL-56, WL-66, WL-76 | ||
| T2 / T series | T2 46, T2 56, T2 66, T2 76, T2 86, T2 101, T46, T56, T66, T76, T86 | ||
| TT series | TT 46, TT 56 | ||
| T6 series | T6 76, T6 86, T6 101, T6 116, T6 131, T6 146 | ||
| T6S series | T6S 76, T6S 86, T6S 101, T6S 116, T6S 131, T6S 146 | ||
| B series | B46, B56, B66, B76, B86, B101, B116, B131, B146 | ||
| MLC series | NMLC, HMLC, 3C, 4C, 6C, 8C | ||
| LTK series | LTK48, LTK60 | ||
| WF series | HWF, PWF, SWF, UWF, ZWF | ||
| WT series | RWT, EWT, AWT, BWT, NWT, HWT(Single Tube, Double Tube) | ||
| WG series | EWG, AWG, BWG, NWG, HWG(Single Tube, Double Tube) | ||
| WM series | EWM, AWM, BWM, NWM, HWM | ||
| Other sizes | AX, BX, NX, HX, TBW, NQTT, HQTT, TNW, 412F, BTW, TBW, NTW, HTW, T6H, SK6L-146 | ||
| Chinese standard | 56mm, 59mm, 75mm, 89mm, 91mm, 108mm, 110mm, 127mm, 131mm, 150mm, 170mm, 219mm, 275mm | ||
| Russian standard | 59, 76, 93, 112, 132, 152 mm | ||
| Special sizes can also be made as per request | |||
Features of Impregnated Diamond Bits:
1. This diamond tool features with fast penetration rate, because the matrix of our impregnated diamond bits is specially designed (it is designed to expose new diamonds to the bits' cutting face as wear occurs).
2. Can help reduce the cost for diamond drilling: our impregnated diamond bits are manufactured to give optimum penetration rates and service life.
3. The hardness and abrasiveness of the formation to be drilled largely determined the optimum diamond size, concentration and matrix type, etc.
